So... I have new diaphragms for my 802's and they need the new wires to convert to the quick connectors. I have 1/4" connectors but they do not make a firm connection. Are these metric? Also what wire do you use I have rat shack stranded 20g.
So... I have new diaphragms for my 802's and they need the new wires to convert to the quick connectors. I have 1/4" connectors but they do not make a firm connection. Are these metric? Also what wire do you use I have rat shack stranded 20g.

20 is a tad small, I use generally 18, but doubt the difference is much on a short piece. Sometimes VERY lightly pinching the connectors with a pair of needle nose helps.
Your neighbors called. They like your music.
Thanks OG for the advice someone suggested a drop of solder to keep them connected. They are so lose that if you hold them upside down the connectors fall off. Which made me wonder if they were metric.
Shouldn't a guy be using a dab of dielectric grease on all connections?
Dielectric grease? Is that the stuff they smear on the paddles before they jump start you at the hospital.
That would be the stuff, although it won't work if your terminal...LOL I personally wouldn't put it on my terminals, I don't like the sound of grease in my speakers...or on my speakers for that matter. Shabamm!!!That is my first double Pun!!! I hope John Travolta or Olivia Newton John doesn't read this.![]()
You'd want a conductive grease, not dielectric.
If you know a tower climber or lineman, you might luck into some of this stuff. I use it on most of the electrical connections on my powertoys and outdoor mechanical connections on solar panels.
![]()
Bookmarks